About Airthings Consumer
Airthings Consumer is an MCP server published by michaelahern in the AI category: a Model Context Protocol (MCP) server for Airthings Air Quality Monitor devices.
Recent commit activity is the strongest signal that reported issues will get attention.
Install
Claude Code
claude mcp add airthings-consumer -- npx -y airthings-consumer-mcpnpx
npx -y airthings-consumer-mcpThis server has no ConduID identity, so agent calls to it are not receipted. Pin the version you install and review the source before granting it credentials.
Tools (3)
airthingsGet information about my Airthings air quality monitoring devices and their current sensor readings.
Parameters not published.
airthings-remote-control-getGet the current remote control state of an Airthings Renew air purifier.
Parameters not published.
airthings-remote-control-setSet the remote control mode of an Airthings Renew air purifier. Available modes: OFF, AUTO, SLEEP, BOOST, MANUAL. Fan speed (1-5) is required for MANUAL mode.
Parameters not published.
Ask AI
✦
Ask AI about Airthings Consumer
Powered by Claude · Grounded in docs
I know everything about Airthings Consumer. Ask me about installation, configuration, usage, or troubleshooting.
Security checks
- ✓README presentThe repository ships documentation.
5 checks have not been run yet.
README
Airthings Consumer MCP Server
A Model Context Protocol (MCP) server for Airthings Air Quality Monitor devices.
Claude Desktop
Download airthings-consumer-mcp.mcpb from Releases
Installation
- Getting Started with Local MCP Servers on Claude Desktop
- Desktop Extensions: One-click MCP server installation for Claude Desktop
Screenshot
Claude Code
Config: .mcp.json
$ claude
╭───────────────────────────────────────────────────╮
│ ✻ Welcome to Claude Code! │
│ │
│ /help for help, /status for your current setup │
│ │
│ cwd: /workspaces/airthings-consumer-mcp │
╰───────────────────────────────────────────────────╯
> Use #airthings to get the current indoor air quality and provide an opinion on the current readings.
● Kitchen Air Quality - Very Good
Excellent readings:
- Radon: 0.89 pCi/L (well below EPA action level)
- CO2: 465 ppm (good ventilation)
- Temperature: 69.6°F (comfortable)
- VOCs: 114 ppb (improved from earlier, good level)
Good readings:
- PM2.5/PM1: 2 mg/m³ (low particulate matter)
Needs attention:
- Humidity: 34% (still low - add moisture to reach 40-60%)
Bedroom device appears offline or not reporting data.
Amazon Q
Config: .amazonq/mcp.json
$ q
✓ airthings_consumer_mcp loaded in 0.95 s
⢠⣶⣶⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣤⣶⣿⣿⣿⣶⣦⡀⠀
⠀⠀⠀⣾⡿⢻⣿⡆⠀⠀⠀⢀⣄⡄⢀⣠⣤⣤⡀⢀⣠⣤⣤⡀⠀⠀⢀⣠⣤⣤⣤⣄⠀⠀⢀⣤⣤⣤⣤⣤⣤⡀⠀⠀⣀⣤⣤⣤⣀⠀⠀⠀⢠⣤⡀⣀⣤⣤⣄⡀⠀⠀⠀⠀⠀⠀⢠⣿⣿⠋⠀⠀⠀⠙⣿⣿⡆
⠀⠀⣼⣿⠇⠀⣿⣿⡄⠀⠀⢸⣿⣿⠛⠉⠻⣿⣿⠛⠉⠛⣿⣿⠀⠀⠘⠛⠉⠉⠻⣿⣧⠀⠈⠛⠛⠛⣻⣿⡿⠀⢀⣾⣿⠛⠉⠻⣿⣷⡀⠀⢸⣿⡟⠛⠉⢻⣿⣷⠀⠀⠀⠀⠀⠀⣼⣿⡏⠀⠀⠀⠀⠀⢸⣿⣿
⠀⢰⣿⣿⣤⣤⣼⣿⣷⠀⠀⢸⣿⣿⠀⠀⠀⣿⣿⠀⠀⠀⣿⣿⠀⠀⢀⣴⣶⣶⣶⣿⣿⠀⠀⠀⣠⣾⡿⠋⠀⠀⢸⣿⣿⠀⠀⠀⣿⣿⡇⠀⢸⣿⡇⠀⠀⢸⣿⣿⠀⠀⠀⠀⠀⠀⢹⣿⣇⠀⠀⠀⠀⠀⢸⣿⡿
⢀⣿⣿⠋⠉⠉⠉⢻⣿⣇⠀⢸⣿⣿⠀⠀⠀⣿⣿⠀⠀⠀⣿⣿⠀⠀⣿⣿⡀⠀⣠⣿⣿⠀⢀⣴⣿⣋⣀⣀⣀⡀⠘⣿⣿⣄⣀⣠⣿⣿⠃⠀⢸⣿⡇⠀⠀⢸⣿⣿⠀⠀⠀⠀⠀⠀⠈⢿⣿⣦⣀⣀⣀⣴⣿⡿⠃
⠚⠛⠋⠀⠀⠀⠀⠘⠛⠛⠀⠘⠛⠛⠀⠀⠀⠛⠛⠀⠀⠀⠛⠛⠀⠀⠙⠻⠿⠟⠋⠛⠛⠀⠘⠛⠛⠛⠛⠛⠛⠃⠀⠈⠛⠿⠿⠿⠛⠁⠀⠀⠘⠛⠃⠀⠀⠘⠛⠛⠀⠀⠀⠀⠀⠀⠀⠀⠙⠛⠿⢿⣿⣿⣋⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠛⠿⢿⡧
╭─────────────────────────────── Did you know? ────────────────────────────────╮
│ │
│ You can enable custom tools with MCP servers. Learn more with │
│ /help │
│ │
╰──────────────────────────────────────────────────────────────────────────────╯
/help all commands • ctrl + j new lines • ctrl + s fuzzy search
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🤖 You are chatting with claude-4-sonnet
> Use #airthings to get the current indoor air quality and provide an opinion on the current readings.
> I'll get the current air quality readings from your Airthings devices and provide an analysis.
🛠️ Using tool: airthings from mcp server airthings_consumer_mcp
⋮
● Running airthings with the param:
⋮ {
⋮ "arguments": {},
⋮ "name": "airthings"
⋮ }
> ## Kitchen Air Quality - Very Good Overall
Excellent readings:
• **Radon**: 0.89 pCi/L (well below EPA action level of 4 pCi/L)
• **CO2**: 465 ppm (good ventilation - below 600 ppm is ideal)
• **Temperature**: 69.6°F (comfortable range)
• **VOCs**: 114 ppb (good level for indoor air)
Good readings:
• **PM2.5/PM1**: 2 mg/m³ (low particulate matter levels)
• **Pressure**: 79,226 Pa (normal atmospheric pressure)
Needs attention:
• **Humidity**: 34% (low - ideal range is 40-60% for comfort and health)
Recommendations:
• Consider adding a humidifier to bring humidity up to the 40-60% range
• The low humidity could cause dry skin, respiratory irritation, and static electricity
• All other readings indicate excellent air quality with good ventilation
Bedroom Status:
• Device appears offline or not reporting data - you may want to check the device connection or battery status
Overall, your kitchen has excellent air quality with just the humidity needing some attention!
README copy captured when this server was indexed; it may lag the repository. The original is authoritative.