About Openems
Openems is an MCP server in the Science category: mCP server wrapping openEMS 3D FDTD for AI-assisted antenna and RF-structure design — patches, dipoles, horns, helices, microstrip, coupled lines, via transitions.
Install
git clone https://github.com/RFingAdam/mcp-openemsThis server has no ConduID identity, so agent calls to it are not receipted. Pin the version you install and review the source before granting it credentials.
Tools (3)
[**lineforge**](https://github.com/RFingAdam/lineforge)2D quasi-TEM closed-form for transmission lines (microstrip, stripline, CPWG, differential, three-conductor). Use this when you need impedance fast and the geometry is 2D.
Parameters not published.
[**mcp-nec2-antenna**](https://github.com/RFingAdam/mcp-nec2-antenna)Wire-antenna method-of-moments (dipole / Yagi / vertical / loop / inverted-V). Use this when you have a wire-antenna geometry and don't need the 3D-field detail of FDTD.
Parameters not published.
[**mcp-pcb-emcopilot**](https://github.com/RFingAdam/mcp-pcb-emcopilot)PCB layout review (decoupling, return paths, plane resonances, DDR/PCIe/USB SI). Often pairs with mcp-openems for full-wave validation of a flagged region.
Parameters not published.
Ask AI
Ask AI about Openems
Powered by Claude · Grounded in docs
Security checks
6 checks have not been run yet.