▸ BICAMERAL
  ┌───────────────────────────────────────────────┐
  │  what your team decided  ↔  what the AI built │
  └───────────────────────────────────────────────┘

Bicameral MCP

Close the gap between what your team decided and what your AI actually builds.

Bicameral is a local-first MCP server that ingests your meeting transcripts, PRDs, and Slack threads, maps every decision to the code that implements it, and automatically surfaces alignment gaps — before they become bugs.

---

The Problem

Engineering teams make hundreds of product decisions per week. A tiny fraction end up in tickets. None are linked to the code that implements them.

When you build with an AI coding assistant, this disconnect accelerates:

• The agent has no memory of the sprint planning where you decided on the rate limit
• It implements checkout without knowing the compliance rule from last week's Slack thread
• By the time someone notices, the gap has compounded across three PRs

Bicameral solves spec-alignment friction. It acts as a persistent, auditable memory layer between your product decisions and your codebase — so your AI agent always has the right context before writing a line of code.

  meeting transcript       PRD / Slack thread       inline answer
         │                        │                       │
         └────────────────────────┼───────────────────────┘
                                  ▼
                          bicameral.ingest
                                  │
                    ┌─────────────▼──────────────┐
                    │       Decision Ledger        │
                    │   what was said  ↔  code    │
                    │  status: reflected | drifted │
                    │          | gap | ungrounded  │
                    └─────────────────────────────┘
                                  │
              ┌───────────────────┼───────────────────┐
              ▼                   ▼                   ▼
       preflight fires      dashboard shows      drift detected
     before you code        full picture        at review time

---

How It Feels

Before implementing a feature, your agent runs bicameral.preflight and surfaces:

(bicameral surfaced — checking Stripe webhook context)

📌 3 prior decisions in scope:
  ✓ Idempotency via Redis SETNX with 24h TTL
    src/middleware/idempotency.ts:checkIdempotencyKey:42-67
    Source: Sprint 14 planning · Ian, 2026-03-12

  ⚠ DRIFTED: Trust Stripe event.created, not server time
    src/handlers/webhook.ts:processEvent:80-92
    Drift evidence: switched to Date.now() in PR #287

⚠ 1 unresolved open question:
  • "Should we deduplicate by event.id or (account_id, event.id)?"
    Source: Slack #payments 2026-03-20

At any time, the dashboard gives you the full picture:

---

Quickstart

pipx install bicameral-mcp
bicameral-mcp setup

The setup wizard detects your repo, installs the MCP server config into Claude Code, and adds a git hook that automatically syncs the ledger after every commit. Restart Claude Code and you're done.

Verify it works:

bicameral-mcp --smoke-test

---

What setup Installs

Running bicameral-mcp setup writes these files to your repo:

File	What it is	Required?
.mcp.json	MCP server config for Claude Code	Yes — registers the server
.bicameral/config.yaml	Collaboration mode (solo/team) and guided-mode flag	Yes — stores your preferences
.bicameral/ledger.db	SurrealDB decision ledger (solo mode)	Auto-created on first tool call
.gitignore entry	Ignores .bicameral/ in solo mode	Recommended
.claude/settings.json	PostToolUse hook: auto-calls bicameral.link_commit after git commits	Optional — improves sync
.claude/skills/bicameral-*/SKILL.md	Slash commands (/bicameral:ingest, /bicameral:preflight, etc.)	Recommended

Removing Bicameral

To fully uninstall from a repo:

# 1. Remove the MCP server
claude mcp remove bicameral --scope project

# 2. Remove data and config
rm -rf .bicameral/

# 3. Remove skills
rm -rf .claude/skills/bicameral-*/

# 4. Remove the git hook (if installed)
#    Open .claude/settings.json and delete the PostToolUse entry
#    with "bicameral" in the command field.

# 5. Remove the .gitignore entry
#    Delete the "# Bicameral MCP" block from .gitignore.

---

Core Concepts

Decision Status

Every tracked decision has a status derived at query time — never stored. This makes Bicameral immune to rebase, squash, and cherry-pick.

Status	Meaning
reflected ✓	Code was verified to implement this decision
drifted ⚠	Code changed since the decision was last verified
ungrounded ○	Decision tracked, but no matching code region found
pending	Code region found, but not yet verified by the agent
gap ◈	Open question — a known unknown that needs an answer before the code can be correct
superseded —	Replaced by a later decision

How Grounding Works

When you ingest a decision, Bicameral tries to find the code that implements it:

1. Caller-supplied regions (v0.4.23+, preferred) — the agent runs validate_symbols + search_code before ingesting and passes explicit code_regions. Exact, zero false positives.
2. Server-side BM25 fallback — when no regions are supplied, the server runs BM25 text search + tree-sitter symbol extraction. Good for abstract decisions without an obvious code anchor.

Once a region is bound, bicameral.link_commit stores a content hash. From that point on, any edit to those lines triggers a drift flag.

When Does link_commit Run?

link_commit syncs a commit's changes into the ledger — it recomputes content hashes and re-evaluates drift for every bound decision.

It fires automatically in three ways:

1. After every bicameral.ingest — auto-chained by the server
2. After git commits/merges/pulls — via the PostToolUse hook installed by setup
3. Before every bicameral.preflight — lazy catch-up if HEAD has advanced since the last sync

If you commit outside of Claude Code (e.g., from a terminal), the next preflight call will sync the ledger before surfacing context.

Collaboration Modes

	Solo (default)	Team
Who	Individual eval or single-dev use	Any mix of devs, PMs, designers
Storage	Local only (gitignored)	Local DB + git-committed event files
Sharing	Nothing shared	Normal git push/git pull
Merge conflicts	N/A	Zero — per-user append-only files

In team mode, a PM ingests a PRD; when a dev pulls, preflight surfaces those decisions as coding context and the dashboard shows what still needs implementation.

.bicameral/
├── events/                ← committed to git (shared decisions)
│   ├── pm@co.com.jsonl    ← PM's ingested PRDs and transcripts
│   └── dev@co.com.jsonl   ← developer's commit syncs
├── config.yaml            ← committed (mode, guided flag)
└── local/                 ← gitignored (materialized state, DB)

---

Slash Commands

After setup, Claude Code gets these slash commands:

Command	When to use
/bicameral:ingest	Paste a transcript, PRD, or Slack thread to track its decisions
/bicameral:preflight	Surface relevant decisions and drift before implementing
/bicameral:history	See all tracked decisions grouped by feature area
/bicameral:dashboard	Open the live decision dashboard in your browser
/bicameral:reset	Wipe and replay the ledger (emergency use)

The agent also fires these automatically — preflight before any code change, ingest when you paste a document.

---

MCP Tools Reference

13 tools across three categories

Decision Ledger

Tool	Purpose
bicameral.ingest	Ingest a transcript, PRD, or Slack export into the ledger
bicameral.preflight	Pre-flight: surface prior decisions and drift before coding
bicameral.search	Search past decisions by topic
bicameral.brief	Full brief for a feature area (decisions, drift, divergences, gaps)
bicameral.history	Read-only snapshot of all decisions grouped by feature
bicameral.link_commit	Sync a commit — update content hashes, re-evaluate drift
bicameral.drift	Detect drift for decisions touching a specific file
bicameral.judge_gaps	Run the business-requirement gap rubric on a topic
bicameral.resolve_compliance	Write back caller-LLM compliance verdicts (compliant/drifted/not_relevant)
bicameral.ratify	Record product sign-off on a decision
bicameral.update	Check for and apply recommended version updates
bicameral.reset	Wipe the ledger for the current repo (dry-run by default)
bicameral.dashboard	Start the local dashboard server and return its URL

Code Locator

Tool	Purpose
validate_symbols	Fuzzy-match symbol name hypotheses against the code index
search_code	BM25 + graph traversal with RRF fusion
get_neighbors	1-hop structural graph traversal (callers, callees, imports)
extract_symbols	Tree-sitter symbol extraction from a source file

---

Configuration

Variable	Default	Description
REPO_PATH	.	Path to the repository being analyzed
SURREAL_URL	surrealkv://~/.bicameral/ledger.db	SurrealDB URL. Use memory:// for tests.
CODE_LOCATOR_SQLITE_DB	(auto)	Override path for the code index database
BICAMERAL_AUTHORITATIVE_REF	(auto-detected)	Override the main branch name (default: reads origin/HEAD)
BICAMERAL_PREFLIGHT_MUTE	0	Set to 1 to silence preflight for one session
BICAMERAL_GUIDED_MODE	(from config.yaml)	Set to 1 to force guided (blocking) mode

All data stays local. The embedded SurrealDB instance runs in-process — no separate server.

---

Local Development

git clone https://github.com/BicameralAI/bicameral-mcp.git
cd bicameral-mcp
pip install -e "pilot/mcp[test]"
cd pilot/mcp && pytest tests/ -v

Tests use real adapters with SURREAL_URL=memory:// — no external services required. CI runs on PRs to main via GitHub Actions.

---

Telemetry

Bicameral collects anonymous usage statistics to improve reliability and prioritize development. No code, decision content, file paths, or personally identifiable information is ever collected.

What is collected:

• Tool name (e.g. bicameral.ingest)
• Server version
• Call duration (milliseconds)
• Error flag (boolean)
• Aggregate counts (e.g. number of decisions grounded per ingest call — integers only)

What is never collected: decision descriptions, transcript content, search queries, file paths, repo names, or any user-supplied text.

Opt out at any time:

export BICAMERAL_TELEMETRY=0

or add BICAMERAL_TELEMETRY=0 to the env block in your .mcp.json.

Collaborator access

Telemetry data is stored in a private PostHog project. If you are a design partner, contributor, or researcher who needs access to the usage dashboard, reach out directly at jin@bicameral-ai.com.

---

Contributing

Contributions welcome. Please open an issue before submitting large changes.

---

License

MIT